Видео

Hi -- love this video, thank you! I've been struggling how to rig the slider so that it is inverted (upside down). I can see in your video there is an arm attached to the vertical pole. Can you share what arm that is? And do you simply attach the arm to a ball head and then the ball head to the bottom plate of the slider?

Great content!!! You are broading my brain. but the fact is I've the zeapon micro3 and DJI RS4 that I think I can create some awsome footage to my shots. Thanks again!!!

This is an amazing video! I had no idea you could do so much with it. Subscribed 👍

Thank you from France !

Do you know the difference between Power and Energy. Power is Watts. Energy is Watt Hours. 99W gives you absolutely no information of Energy or Capacity. Of course you’re probably using the wrong units on purpose.

Hartelijk dank voor uw professionele introductie en het delen. Ik hoop dat uw publiek onze producten ook leuk zal vinden. We zullen ook actief naar uw suggesties luisteren en hard blijven werken om u betere producten en ervaringen te bieden.🤗🤗🥰

Wow superb

so dope！👍

Product link: geni.us/oaR5

Product link : geni.us/oaR5

In this case it's "...for all your gear", not "gears".

You wrote that you've connected one via HDMI and one via DP. Is it possible to connect the two monitors with each other (e.g. via DP) and have one connection to a laptop?

Impressive and inspiring

Don’t ever buy this battery. Bought 2 and they both died in less than a week. Sitting ducks

Great video. What C stand is that, that comes with the grip and all that

What is the range?

How can you hear yourself ? While it’s recording your voice ? Or when recording your voice can you not hear the audio yourself at all ??

Will it record each channel separately?

I ordered this battery to review and it swelled and cracked within 24 hours! Moman Promised to send another by return if I sent 1 DAY Tracked . Nothing ever came and no response to proof of receipt etc. 20 Years in Industry -and this is the worst!!! AVOID AT ALL COSTS

Soooo no luck setting it up... just that its awesome. Great review.

that's amazing I have the same slider how can I attach it to the stand i see that you have 2 accessory to attach it to this stand can you give me the link please ?

Love that battery

does anybody happen to know if this can be done with the Dji Ronin RS2 by chance ?? thank you in advance

Hello Is it compatibles with the DJI RS3?

Amazing, very creative, inspiring

Vídeo espetacular e muito informativo. Um pergunta, tem como acionar o zoom de alguns modelos pelo gimbal? Abraço.

Thanks for your fast gear presentation - although we don't see them tested, so what's the purpose? You'll need a compression effect on your voice microphone to regulate your audio levels and pay attention to audio saturation. I realise that it's easier to watch low quality video images than listening to low quality audio. I was looking for your review of the Ambitful FL80 RGB Studio Light Kit but I couldn't find it. It seems that the cooling fans of the LED lights from Ambitful are too noisy for video.

Now that Accsoon has produced the CineView Nano at $130, we can now live monitor performance PTZ

Wooow！Awesome video！😍

Anglerfish SL 1 60 DN US site: www.ifootagegear.com/products/anglerfish-spotlight-sl1-dn-series EU site: eu.ifootagegear.com/products/anglerfish-spotlight-sl1-dn-series Fresnel Light Accessories - 6FPM (mini) US site: www.ifootagegear.com/products/6fpl6fpm-fresnels?_pos=1&_sid=53e0b51a4&_ss=r EU site: eu.ifootagegear.com/products/6fpl6fpm-fresnels?_pos=1&_psq=fresnel&_ss=e&_v=1.0 Fresnel Light Accessories - 6FPL (Standard) US site: www.ifootagegear.com/products/6fpl6fpm-fresnels?_pos=1&_sid=53e0b51a4&_ss=r EU site: eu.ifootagegear.com/products/6fpl6fpm-fresnels?_pos=1&_psq=fresnel&_ss=e&_v=1.0 3INT-MB Mini Bowens Spotlight Intensifier US site: www.ifootagegear.com/products/3int-mb-15-50-intensifier?_pos=1&_sid=57a62425a&_ss=r EU site: eu.ifootagegear.com/products/3int-mb-15-50-intensifier?_pos=1&_psq=3int&_ss=e&_v=1.0 Light Controller Clamp - LC-01 US site: www.ifootagegear.com/products/lc-01-light-clamp?_pos=1&_psq=light&_ss=e&_v=1.0 EU site: eu.ifootagegear.com/products/lc-01-light-clamp?_pos=1&_psq=light&_ss=e&_v=1.0

what microphone are you using during the unboxing? Thanks!

AMAZING!!!

Hello :) do you think it’s enough light with a softbox 120cm?

Way too much irrelevant chatter...

Hi,, great review, i was going to get it since it has a bright monitor that suits me for outdoor and harsh sunny day. I'm wondering about the hot screen, is it going to get me trouble once it's getting hot and hotter? Is it worth to buy in 2023 ? Thank you for this excellent review?

Thank you !

Nice

Hi, nice video. is the fulaim 1000 pro a 16 or 24-bit audio?

keep goigng dude. Creat content!

Where do I buy the tripod? Where can I buy that support that hugs the tube to hold the slider in the center?

Where did I buy that tripod, so I could place the slider that way? I see he has an arm on him, which is very useful

Could please write the link with the model and were you bought this stand

Mashallh so nice

Hello, I have the exact ambitful snoot. I'm used the sutefoto rgb light with it but the light seems dim even when light power was on maximum. I also used the Ad600 with it, light was still dim. What could be the issue, please?

Nice video but the defuser made defrance

How can you tell what audio level the transmitter is on (no LCD as Rode Go)

What is the stand and support arm you are using to hold the slider?

details PLEASE 😅

just bought a hotdog v3 and bun to use with my Crane 3 Lab, and i'm a little disappointed to be honest. The gimbal and slider do NOT sync up, so you program in your waypoints and by the time the slider gets to even the first waypoint, the subject/object is not in the part of the frame that you want it to be. I'm not saying it's completely useless, but it's not good. You can't use it to shoot products expecting professional results. If you want to dolly across to a subject and the pan as you go by, that's not happening. You just dont know when it's going to start the pan. So, you have to do it by hand. If you're going to do it by hand then you're better off buying a cheaper motorised slider. I suppose it would be alright doing landscapes and stuff, but as for in studio. I wouldn't buy one. Also as a side note. I didn't receive a spare belt and thread adapter with mine. The slider comes with a 3/8 thread on it so you can't mount a dslr directly onto it, or even a gimbal, you need a 1/4. Many of the video's you see state that the adapter comes with the slider along with a spare band for the motor, it doesn't. So to buy an adapter you can get a cheap one off amazon for $12/$10, but, once it's tight the camera might not point in the correct direction. To buy an adjustable adapter you're talking an extra £35/$40 for the very cheapest and about £100/$120 for a good one. Just be aware of this. Can I recommend it? Not without a firmware update fixing the sync issue. But my guess it isn't going to be fixed. When the slider came out 2 years ago this issue was highlighted. A firmware update was mentioned as a solution, but it's never happened. If it's not been fixed by now, they aint fixing it. Basically, this is good as a toy or a hobby. The other problem I've found is that if you create a waypoint and then move the slider and create a second, it doesnt slowly move to the second point. It will hit the first point and stay on it until until it moves to the second point, and then jump to that. It would be better if it slowly went form point to poin. That way you can "track" a subject. There needs to be 2 video modes, a point select, and a drag mode. What you actually can do is create a first point and then use the joystick on the gimbal to track the object, as the app records what you do with the gimbal between setting a and b. The problem with that is this, if ive already completed the move by hand, what do i need the app for? The app really is limited in this regards. Be aware of the limitations before you buy one.